新闻中心 当前位置:首页>新闻中心>新闻中心

U型槽模具一般采用的是预制方式

网址:www.paishuicaomj.com  2022-11-05  作者:admin    阅读:

U型槽模具一般采用的是预制方式,通过U型槽模具进行浇筑,为了能让模具发挥更好的作用,在生产时我们要注意模具的变形以及开裂情况,因为出现这样情况的模具所生产出来的预制块可能在规格上与我们其它的预制块不同,不能用于工程之中,这样只是浪费了我们的资源。U型槽模具规格多样,除却我们经常使用的规格我厂可以进行生产意外,还可以根据客户的要求或者是设计图图样进行模具的设计生产,以确保能够满足顾客的需求。U型槽石家庄电动伸缩门 保定桌椅  保定水处理设备 河北机械加工 北京电动门  保定养老院  保定防水模具主要是以多种形状的钢模具为主要成型模具。
The U-groove mold generally adopts the prefabrication method. It is poured through the U-groove mold. In order to make the mold play a better role, we should pay attention to the deformation and cracking of the mold during production, because the prefabricated blocks produced by the mold in this case may be different from our other prefabricated blocks in specifications and cannot be used in the project, which is just a waste of our resources. The specifications of U-groove die are various. In addition to the specifications we often use, our factory can also design and produce the die according to the customer's requirements or design drawings to ensure that the customer's needs can be met. U-groove die is mainly made of steel dies with various shapes.

返回新闻

电话
15188782222